Cool Cars

Amazing Cars 2010 2011

Is this the car of the future? BMW builds roadster made from cloth




A car covered with cloth is something you would associate with the Flintstones, not the cutting edge of 21st century automotive design.

But BMW's latest concept car is exactly that - and it can change shape at the touch of a button.
The Gina - which at first glance looks like any other flashy sports car - is encased in fabric instead of metal panels.
Stretch limo: BMW's latest concept car has a cloth skin instead of metal
Open the door and the slinky fabric creases and wrinkles like skin.
Turn on the headlights and the covers peel up like giant eyelids - designed to make the sporty roadster more aerodynamic.

And its seamless skin - a single piece of durable fabric - can be morphed at the flick of a switch to suit its owner's mood, offering an aggressive or classic look.
BMW's Christopher Bangle said: 'This revolutionary solution opens up new design and production potential.
'The outer skin can move and do things a metal skin couldn't do.'
The German car maker's pioneering vehicle is based on the chassis of a BMW Z8.

Open sesame: The car doors wrinkle and the bonnet opens like a doctors' bag
Its skin is made of a silver expansion-resistant textile which stretches across movable metal wires controlled by hydraulics. The Gina (Geometry and Functions In Adaptions) has no bonnet, roof or boot.

Instead, a single sheet of cloth is layered over its frame, cocooning the driver in the ultra-modern cabin.

Movable parts are controlled by hydraulics operated from a driver's console
'The high-precision fit of the material to the metal mesh also allows surface changes without slackening the tension,' a spokesman said.
'It has a major impact on the interaction between driver and car and enhances it by offering a variety of entirely new options.'

Shut eye: Fabric 'eyelid covers the headlights

There is no need to lift the bonnet to get a look at the engine of this flexible motor - it opens from the centre like Hulk Hogan tearing off his T-shirt.

Opening and closing is similar to the mechanism on a doctor’s traditional medical bag, where clip-lock fasteners are held together in the middle by a rail.

Eye see: The piercing beam of the lamp is revealed


Porsche Panamera



Three-quarters of a year prior to market launch, Porsche has released the first official photos the new Porsche Panamera. Porsche's unique four-seater was conceived and designed as a four-door grand touring sports car, combining numerous talents in typical Porsche style: sporting driving dynamics, a spacious interior, and the supreme comfort of a Gran Turismo. Joining the 911, Boxster and Cayman sports cars as well as the Cayenne SUV, the Panamera is Porsche's fourth model series.
The Porsche Panamera designers have succeeded in positioning it as a brand-new and truly different model while retaining the looks of a typical Porsche. Through its proportions, the Porsche Panamera stands out in its market segment: measuring 76 inches wide and 55.8 inches in height, it is wider and lower than comparable four-door models. The unmistakable GT silhouette is created by the car's overall length of 195.7 inches and short, sporting overhangs. In its styling and details, the Porsche Panamera follows the design philosophy refined over decades on the 911 and successfully implemented on the Boxster, Cayman and Cayenne.

Pure Porsche DNA and comfort for four
Through its design language, the Porsche Panamera establishes a new segment. The symbiosis of sports car DNA derived from the looks of a coupe, the unique interpretation of the classical saloon body and the benefits of a variable space concept give the new Porsche a truly unmistakable appearance. For instance, Porsche Panamera comes with strongly contoured air intakes instead of a conventional radiator grille. Striking wheel arches and the long and sleek engine compartment - with the distinctly contoured wings flanking the flat front lid - create the typical 911 "landscape" Porsche customers have appreciated for over 45 years. V-shaped seams along the hood and a rear window that tapers like an arrow to the rear also are characteristic of a sports car. Muscular shoulders over the rear wheels, the sweep of the coupe-like roofline and visible tailpipes again bear the thoroughbred Porsche DNA.

An elegant roof arch extends over the generous interior. Thanks to the unique and sporting architecture of the interior, the car's occupants are able to experience a cockpit-like atmosphere from all four seats. All occupants enjoy supreme comfort in both the front seats and the two contoured rear seats. The luggage compartment easily takes all passengers' luggage; the Panamera's variable space concept with folding rear backrests enables driver and passengers to adjust the luggage space to individual requirements. Finally, the coupe tailgate in the sporting rear end combines everyday usability with stylish elegance.

Porsche Panamera built in Leipzig; powerful engines hail from Zuffenhausen
Porsche has developed powerful and up-to-date engines for the Panamera, reflecting the qualities typical of the brand; the V-engines come with six and eight cylinders and output ranges from 300 to 500 horsepower. Some engines use turbocharging technology and Direct Fuel Injection, making them both fuel-efficient and very powerful. Power flows to the wheels through either a manual six-speed gearbox or Porsche's seven-speed PDK Doppelkupplungsgetriebe, or Double-Clutch Gearbox.

In addition to rear-wheel drive, the top version of the Porsche Panamera comes with even more sophisticated all-wheel drive, available on other models as an option. Porsche also is preparing a fuel-efficient version of the Porsche Panamera with hybrid drive. Further details on engines, transmissions, performance, prices and equipment will be disclosed next spring.
The Porsche Panamera will be built at Porsche's Leipzig plant, where a 237,000-square-foot production hall and a logistics center currently are under construction. While the Panamera engines are built at Porsche's main plant in Zuffenhausen, painted bodyshells will be supplied by Volkswagen's Hanover plant. The Leipzig plant will then assemble the Porsche Panamera for final delivery, with an annual sales target of about 20,000 units. Porsche is once again cooperating with German suppliers, with some 70 percent of the car's components being created in Germany.

The Porsche Panamera will make its world debut in spring 2009 and the first models will be at U.S dealers in the fall.




Citroen GT Concept



The amazing GT by CITROËN is the first ever car to be specifically designed to bring the virtual and real worlds together. The car makes its global premiere at the Paris Motor Show where visitors can actually drive the car in a true to life simulator on the Citroën stand.

GT by CITROËN, a joint venture between Citroën and the makers of Gran Turismo, was created for the eagerly anticipated 5th game in the multi-million selling Playstation series.

At almost five metres long, GT by CITROËN packs the latest hi-tech racing equipment into an exaggerated sporty frame. Planted on 21-inch, diamond-effect, aluminium wheels, the car's gullwing doors, over-sized rear end with mobile spoiler, gaping air intakes and flat underside exude the qualities of an accomplished racer.

With chrome chevrons on the smooth, aerodynamic, front end asserting the car's Citroën identity, the GT by CITROËN is bursting with styling cues typical of the Company's creative flair. The sharp lines and sculpted body are emphasised by the white-to-grey flared paint work which gives the car a forceful look and an impression of speed - even when it's standing still.

The sleekly muscled racer sports a large wraparound windscreen adding to the impact of the car's size and dynamic appearance. Penetrating blue LED headlamps and slim-line carbon fibre rear view mirrors - which appear to be suspended in mid-air - add to GT by CITROËN's futuristic racing style.

Premium materials used throughout GT by CITROËN's hi-tech interior reflect the car's distinguished and refined personality. In contrast to its light body work, the cabin features a darker, more brooding colour scheme with two padded racing seats finished in black leather and fitted with four point harnesses. The dark leather, along with copper and steel touches inside the cabin and a low-slung driving position, create an opulent and powerful racing environment. Important on-board data is displayed via a red LED head-up display, allowing drivers to maintain focus on the track.

In the game, the GT by CITROËN showcases Citroën's dedication to the environment with an electric drive train powered by a fuel cell, totally eliminating pollutant emissions.


Kazanori Yamauchi, President of Polyphony Digital Inc and creator of Gran Turismo, commented, "GT by CITROËN shows how the worlds of virtual and real-life motoring can join together to create a truly innovative partnership. To see the GT by CITROËN take shape in our game studios and then for real has been a truly unique experience - as our work normally stays in the digital world."




Alfa Romeo Brera S



Few sports cars are developed specifically for Britain's roads. Those that have been tend to become true 'driver's cars'. Alfa Romeo is planning for the new, limited edition Alfa Romeo Brera S to join those ranks.

After a year of intensive suspension and chassis development at Prodrive, the world-leading motorsport specialist, the result is a sports coupe that subtly enhances all that is good about the original Alfa Brera, while bestowing it with outstanding driver feedback and handling.

Distinctly different from the rest of the line-up, this unique addition to Alfa Romeo's UK range includes refined styling changes, inside and out. And to ensure ultimate exclusivity, production of the Alfa Romeo Brera S will be limited to just 500 individually numbered models.

Power comes from a choice of two existing direct injection petrol engines - the 185 bhp 2.2 JTS and the 260 bhp 3.2 V6 JTS.

Marketing director at Alfa Romeo UK, Nicholas Bernard, says: "Significantly, the Alfa Romeo Brera S isn't simply about brute force, it's about how the available power is transferred to the road and how the road surface is communicated back to the driver to bring new levels of sports handling and driver-focused confidence and involvement."

Briefed to make the Alfa Romeo Brera S less of a long-distance tourer and more sporty on UK roads, the engineering team at Prodrive developed a unique suspension set-up. Prodrive engineers meticulously experimented with spring rates and ride heights to match the reduced weights of the 2008 model year Alfa Breras. Then followed an extensive damper tuning exercise to achieve the desired ride/handling balance and steering response required by driving enthusiasts in the UK.


According to Prodrive Project Leader, Peter Cambridge, the result is "a car that 'shrinks' around the driver and delivers all the fun and engagement of a sports car driving experience on A and B-roads. Yet, on motorways, offers a compliant and composed ride."

The sports car driving experience is achieved by reducing roll and pitch, flattening the cornering attitude, and subsequently instilling confidence-inspiring steering.

Peter Cambridge comments: "Our painstaking work with the spring set-up controls exactly how much the car pitches and rolls with every lump, bump, camber and pothole on our roads. Then we developed the dampers to control the rate at which the springs respond. Once we were satisfied with that, we set about really affecting the feel and response of the steering to inspire confidence."

To reduce roll and pitch and achieve an even flatter cornering attitude, Prodrive commissioned bespoke Eibach coil springs and Bilstein dampers.

Spring rates are increased by over 50 per cent compared to the standard Alfa Brera, giving the car a more nimble and agile feel, while the specially tuned gas-filled mono-tube dampers give tighter body control. A careful balance has been created to maintain good compliance over ridges and bumps in the road.

At the same time, the suspension static geometry has also been revised to optimise steering and handling. These changes, together with new 19" alloy wheels and Pirelli PZero Nero tyres, have created a more responsive turn-in to corners, with increased driver feedback, allowing the driver to explore the dynamic limits of the car.

To further enhance suspension geometry, the cars have been lowered by 10 mm front and rear. This lower centre of gravity helps reduce roll and improve cornering and braking performance. In addition, the lowered suspension gives the Alfa Romeo Brera S a more purposeful stance.

At each corner of the Alfa Romeo Brera S, unique Alfa 8C Competizione-inspired, lightweight 19" alloy wheels have been fitted. Although the wheels are eye-catching, the all-new design was commissioned by Prodrive primarily for performance, rather than just cosmetic appeal. The reason is unsprung weight - the weight carried by the car on the 'road side' of the spring and shock absorber. This plays a significant role in the way the car steers, handles and transmits feedback to the driver.

The lighter the wheel, the better it tracks undulations in the road surface without requiring heavy damping to control it. The unsprung weight has been further reduced by the adoption of hollow anti-roll bars and aluminium suspension components from the Factory.

As a result, the weight of both Alfa Romeo Brera S models is lower than the rest of the range. The front-wheel drive 3.2 V6 JTS is almost 100 kg lighter than the Q4 version and the 2.2 JTS version weighs 35 kg less.

The Alfa Romeo Brera S also sounds different from the standard range. The original characteristic growl of the V6 has been enhanced by careful redesign of the rear silencers. Thanks to a Holmholtz resonator connected in tandem with each silencer, the 2.2 JTS model now emits a sportier yet refined burble.

The exhaust has been altered to mirror the shape of the rear lights. Finished with chrome embellishers, they feature a Prodrive logo on the tailpipe exterior. This is just one of several subtle exterior enhancements to the award-winning Alfa Brera, including Prodrive branded front stone deflectors, and a bespoke red 'S' or 'SV6' on the C-pillar.

Inside the 3.2 V6 JTS Alfa Romeo Brera S, changes are more obvious. Not only are the supportive sports seats upholstered in soft black Frau® leather with red stitching, so are the dashboard fascia, door panels, steering wheel and gearlever. The centre console and instruments are faced in a dark finish. This interior can also be specified on the 2.2 JTS version.

Foot pedals are fashioned from drilled aluminium and the headrest recess houses a limited edition Brera S aluminium plate, featuring the flags of Italy and Britain.

For the record, the 2.2 JTS and 3.2 V6 JTS Alfa Romeo Brera S can reach 62 mph from rest in 8.6 and 7.0 seconds respectively, on the way to maximum speeds of 139 and 155 mph.

The transition from Alfa Brera to Brera S takes place at Alfa Romeo UK's dedicated import centre, near Bristol, and is overseen by Prodrive.

Nicholas Bernard says: "The standard Brera is well loved and delivers a great all-round driving experience. But the Alfa Romeo Brera S is deliberately honed, tuned and fettled for British roads and aimed directly at a dedicated audience of driving enthusiasts."








Renault Megane Trophy



Having starred in the World Series by Renault's premier saloon car championship since the creation of the WSR in 2005, Renault Mégane Trophy has undergone a raft of radical modifications in readiness for the 2009 campaign. The most visible change concerns its new body design which takes its inspiration from the lines of New Mégane Coupe. Under the bonnet, a fresh look has also been taken at the Renault-Nissan Alliance's V6 3.5 24V powerplant which now delivers 360hp. At the same time, Renault Sport Technologies has carried over many of the acclaimed features of the current Renault Mégane Trophy to produce a reliable, competitive and affordable racing car.

There can be no mistaking new Renault Mégane Trophy's resolutely sporty calling and pedigree thanks its stunning looks which are based on the design of new Renault Mégane Coupe. The front and rear light units and windscreen are those of the road car, while the designers at the Renault Technocentre have made full use of digital simulation technology in the realm of fluid mechanics to hone the flowing lines of the bodywork. New Renault Mégane Trophy also carries over the ground effect aerodynamics of the existing car:
The front splitter channels airflow to the extractors
Rear downforce is generated by the diffuser and wing

Refinements to the set-up have produced a 20% improvement in downforce and a 15% reduction in drag which, together, represent a gain of almost 40% in terms of the new car's aerodynamic performance over the previous generation machine.

New Renault Mégane Trophy is equipped with butterfly doors redolent of the world of GT and sports-prototype racing.

Under its composite outer skin, new Renault Mégane Trophy features the same mechanicals as the current car, including an FIA-homologated sports-prototype tubular chassis, a mid-rear V6 3.5 24V engine, a semiautomatic gearbox with steering wheel-mounted paddle shift, double wishbone suspension with adjustable dampers, 18-inch wheels and Michelin tyres, etc.

A new inlet manifold, which is fed by roof-mounted air-ducts, has taken engine power from 330 to 360hp. The new car's reliability is as excellent as ever with rebuild intervals of every 5,500km. Combined with the aerodynamic gains, the extra power output of the V6 3.5 24V engine will enable new Renault Mégane Trophy to lap in times similar to those of a Porsche GT3.

After completion of its development programme, new Renault Mégane Trophy will go on sale at the end of the year in the form of a kit that will enable existing cars to be upgraded. The modifications required to adapt the chassis to the new bodywork will be carried out by the Alpine factory in Dieppe.

As in previous years, the Eurocup Renault Mégane Trophy will form part of the World Series by Renault programme and its calendar takes in some of Europe's most prestigious venues. This single-make series, which is a hit with drivers and teams alike, is based on the same core strengths that have forged the success of Renault Sport's race championships, namely:
A perfectly level playing field thanks to rigorous scrutineering checks and the outlawing of tuning of the majority of components
Contained costs thanks to restrictions relating to tyres and private testing
Extensive media coverage thanks to live television, plus the opportunity to race in meetings that have attracted two million spectators since 2005

In the course of each race weekend, drivers contest two races of a duration of approximately 40 minutes each and which include a mandatory refuelling stop. Renault Mégane Trophy has been widely praised for its simplicity and the ease with which drivers are able to familiarize themselves with the cars, while the series is aimed at upcoming youngsters who have come up through the ranks of single-seater formulae and gentleman drivers.




Gumpert Unveils the Uncompromising Apollo Sport





TECHNICAL SPECIFICATIONS

DIMENSIONS
Length 4,460 mm / 175.6"
Width 1,998 mm / 78.6"
Height 1,114 mm / 43.8"
Wheel base 2,700 mm / 106.3"
Wheel gauge
front: 1,670 mm / 65.7"
back: 1,598 mm / 62.9"
Boot volume: 100 l
WEIGHT
Kerb weight: below 1,200 kg / 2,645 lbs
Allowed total weight: 1,500 kg / 3,306 lbs
Approved axle load
front: 650 kg / 1,452 lbs
back: 900 kg / 1,984 lbs
ENGINE
Cylinders: 8
Type: 90° - V
Valves per cylinder: 5
Displacement: 4,163 cm3 / 254 in3
Stroke: 93 mm / 3.66"
Bore: 84.5 mm / 3.32"
Nominal output: 478 kW (650 HP) @ 6,500 rpm
Maximum torque: 850 Nm (626.9 lb-ft) @ 4,000 rpm [with 820 Nm @ 2700 rpm]
Maximum revs: 7,200 rpm
Compression ratio: 9,3
Recommended fuel type: 98 ROZ / 88 MOZ
Emission standard: Euro 4
GEARBOX
Sequential six-speed gear box with synchronisation and oil cooling
Twin plate clutch configuration (diameter 200 mm / 7.87" each)
Differential lock by Torsen
Custom-made gear ratios
WHEELS
Tire dimension
front: 255/35ZR19
back: 345/35ZR19
Wheel dimension
front: 10J x 19
back: 13J x 19
Wheel rim type: Aluminium cast wheels with centre lock
PERFORMANCE
Top speed: 360 km/h (224 mph)
0-100 km/h (0-62 mph): 3.0 s
0-200 km/h (0-124 mph): 8.9 s

The Gumpert Apollo is a synthesis of dynamic and design with pure driving pleasure and unique performance. On the road it speeds like not many other cars and on the race track it cries out to be challenged by an opponent that can match its breathtaking acceleration and handling. Now, it is due to get a worthy competitor out of its own stable. At the 77th Geneva Motor Show, the Gumpert Sportwagenmanufaktur will present the Apollo Sport to the wide public.

The Gumpert Apollo Sport is the rebel amongst the super sports cars. Its bodywork combines sexy curves with potent edges and angles and aims for uncompromising aerodynamics. A clear demonstration of the principle form follows function. Its challenging sporting design derives from the requirement to built a street legal racing car, whose number one priority is to provide extraordinary performance on the circuit, but at the same time embodying a vehicle suitable for daily use.

The highest importance was attached to safety: the tubular space frame in chrome-molybdenum steel with integrated safety monocoque fabricated in carbon-fiber passes all crash-tests regulations, while a cashbox offers additional protection. The gaping air intake stub over the roof and on the rear signals power, dynamics and superiority. The eight cylinder, bi-turbo mid-engine with up to 800 horsepower is capable of catapulting this 2645 lbs missile from 0-62 mph in only 3 seconds.

The Apollo Sport is equipped with an extended aerodynamic package and, in contrast to the three part spoiler of the Apollo, possesses a racing wing which gives even more down force. The more powerful engine still manages to accelerate this beast to a top speed of 224 mph.

As you can guess, it is not for nothing that this cars is named after the fierce Greek God.

The two-seater also convinces from the inside, with its sporty and elegant alcantara interior, and offers air-condition, CD-player, navigation system and reverse view camera as standard equipment. A two-layer metallic finish available in any conceivable color, gives this racer a particular luster. As a special accessory the Apollo is equipped with an airjack, a pneumatic jacking pad.



Related Posts Plugin for WordPress, Blogger...